Rogue Flash Adapter Standard v2

Rogue Magnetic Flash Adapter v2

• Stretch-Fit Silicone Design – Stretches securely over rectangular speedlights and flashes
• Instantly Enables Rogue Magnetic Modifiers – Modifiers snap directly to Adapter v2's metal ring

Simple Stretch-Fit Silicone Design

The Rogue Flash Adapter v2 Standard is made of durable silicone that stretches securely over rectangular speedlights and flashes, holding a metal ring in place over the flash head.  The v2 Adapter fits flashes sized from 1.6" x 2.4" up to 2" x 3" and is easy to attach and remove.  It can be removed between uses, or is compact enough to be left on your flash in your bag.  To help prevent your Godox AD200 from overheating, the Adapter v2 includes heat vent cutouts to allow the flash to vent normally.  

Snap-On Magnetic Mount – Rogue Magnetic Modifiers attaches instantly to the Adapter v2

Rogue Magnetic Modifiers snap directly onto the metal ring, instantly enabling full compatibility with the entire Rogue Magnetic System (sold separately).

How to Attach the Rogue Flash Adapter to your rectangular flash head

1. Start at one corner.  Hook one end of the Adapter v2 over the corner of the flash head as shown in the image below.
2. Stretch it over the flash head.  Pull the tab nearest to you to stretch the silicone adapter over the flash head in one motion.
3. Slide it down into position.  Alternating sides, pull the tabs down along each side of the flash head until the adapter is fully seated - you'll know it's there when the white brace beneath the metal ring sits flush against the top of the flash head.

Flash Compatibility:

The silicone mount of the Standard v2 will stretch to fit flash heads measuring from 40x60mm to 50x75mm (approximately).  It does not fit the Canon EL1, which is too large.

Flash Compatibility for Rogue Flash Adapter Standard v2 (and similar size flashes):

• Canon EL5, 550EX, 580EX, 600EX, etc. (Does not fit EL-1)
• Godox AD200, TT600, TT685, V860, etc.
• Metz 52 AF1
• Neewer (Q3, TT560, NW665, NW760), etc.
• Nikon SB700, SB900, SB910, SB5000, etc.
• Nissin Di700A, MG10
• Sony F45, F46, F60
• Yongnuo YN200, YN560, YN600, YN685
• *Not listed - other similarly sized flashes

The Rogue Flash Adapter Standard v2  is Not Compatible with Small Flashes: The Rogue Flash Adapter Standard v2  is not compatible with the smaller Godox TT350, Nikon (SB600, SB800), Nissin (i40, i60A), Sony F32, and other similarly sized small flashes. For Small Flashes get the Rogue Flash Adapter SMALL.

Modular Magnetic Light Modifier System:  The Rogue Flash Adapter Standard v2 is one component of the modular Rogue Round Flash Magnetic Light Modifier system for camera flashes, including: Rogue Flash Diffuser Dome, Rogue Flash Grid 45, Rogue Flash Gel Lens, Rogue PF Adapter, and Rogue Round Flash Gel Kits (Ultimate Portrait Kit and Color Correction Kit).

Rugged and Durable:  The Rogue Flash Adapter v2 is designed to withstand the rigors of professional event photography.  It is made from durable silicone rubber, high impact polycarbonate, and a plated steel ring.  Weight 2.8 oz (78g).

How to Attach the Rogue Flash Adapter Standard to Your Flash (v1 adapter shown):